Online Specifications

Download Online Advertising Specs

Print Specifications

Type of Binding

Notched

Journal Trim Size

207 mm x 276 mm. Safety allowance for live matter: 12mm from trim.

Run of Journal Page Sizes

	Non-Bleed Size			Bleed Size
	Width		Height	Width		Height
Full page:	178 mm	x	254 mm	213 mm	x	282 mm
1/2 page horizontal:	178 mm	x	124 mm	213 mm	x	140 mm
1/2 page vertical:	86 mm	x	254 mm	107 mm	x	282 mm

Career & Events Section Page Sizes

	Non-Bleed Size
	Width		Height
Full page:	7 1/4"	x	9 7/8"
1/2 page horizontal:	7 1/4"	x	4 3/4"
1/2 page vertical:	3 1/2"	x	9 7/8"
1/4 page:	3 1/2"	x	4 3/4"
1/8 page:	3 1/2"	x	2 1/8"

Download Career & Events Section guidelines

Submission of Ads

We prefer and strongly recommend the submission of ads via High-Resolution Digital Media as follows: Required format is PDF: Adobe Acrobat 6.0 + up. Electronic Transfer: Internet, FTP. Please contact your Production Associate for FTP information. Ads must be complete and sized at 100% (confirm final trim size of journal). Ad size needs to include necessary bleeds (minimum bleed allowance = 1/8" each side). All fonts and graphics must be embedded; Open Type fonts are recommended. Ads must be saved as high resolution for print publication (minimum of 300 dpi for half tone times, 600 dpi for images containing pictures and text, 1200 dpi for line art). Four-color solids should not exceed SWOP density of 300%. Convert all RGB to CMYK.

Insert Requirements

• Acceptance: All inserts must be approved by the publisher. A copy should be supplied to Sales Representative before printing the inserts. Please allow three weeks for approval.
• Sizes: An allowance of 3mm on each outside edge in addition to the trim size is required for all colour full pages and all DPS and text should not come within 6mm of the trim size of the Journal.
• Note: Unusual inserts may attract an extra charge for handling. Where a loose insert exceeds 15g, any additional postage costs will be passed on to the advertiser.

Disposition of Materials

Material, other than inserts, will be held one year from date of last insertion and then destroyed unless specifically instructed otherwise. Excess inserts will not be held after binding unless requested in writing.